My SIC2 console buttons are flickering and the screen doesn’t come on

Note: the following information is for the SIC2 console. It does not pertain to the SIC1 console.

If the battery charge on the SIC2 is low, the END and RIDE buttons will flicker, and the screen will not turn on. The SIC2 may have lost its charge during shipping.

To charge the battery, ride the bike, with the console installed, for 60 minutes @ 60 RPM for a 75% charge. After 15 - 20 minutes, the console should turn on and display ride data.

If only the END button is flickering, or the console does not turn on, please start a support ticket.